Patient Alarms

9 Item(s)

per page
  1. 13602

    Pull Cord Alarm

    Model # 13602

    • Economical way to notify staff that a patient has moved
    • Alarm easily secures to a bed or chair with a self-contained clip
    • Activation cord is adjustable from 18"– 36"
    • When user gets up, the pin connector pulls from the alarm unit activating the signal
    • Deactivate with On/Off switch
    • Two volume settings: 97 dB and 103 dB
    • Requires one 9V battery (Included)
    Learn More
  2. 13603

    Tamper-Proof Magnetic Pull Cord Alarm

    (Comes with Screwdriver to Remove Battery Cover)

    Model # 13603

    • When magnetic pull switch is removed, alarm is activated
    • Pull switch can be activated from any direction
    • Convenient On/Off switch for easy activation and deactivation
    • Easily mounts on wheelchair or bed
    • Cord adjusts from 28"– 58"
    • Alligator clip allows for attachment to patient’s clothes
    • 97 – 103 dB
    • One 9V battery included
    Learn More
  3. 13605

    Pressure-Sensitive Chair and Bed Patient Alarm

    Model # 13605, 13606, 13608, 13609

    • Alerts care giver with audio alarm when patient gets out of a chair or bed
    • Pressure-sensitive pad connects to the audio alarm
    • The alarm comes with a safety alert, On/Off switch and low battery warning
    • Comes with 9V Battery (Included)
    Learn More
  4. Main Image

    Wireless Bedside Alarm

    Model # 13601

    • Alarm sounds when individual attempts to leave or falls out of bed
    • Ideal for ICU or anywhere early detection is necessary
    • Invisible curtain of protection provides a wide area of protection
    • Installs easily with magnetic mount
    • One 9V battery included
    • Swivel bracket adjusts monitoring beam
    • No pads or clips to avoid false alarms
    • 85 – 95 dB without volume control
    Learn More
  5. CKEY-01

    Replacement Parts and Accessories

    Model # CKEY-01, REPL-TM, NCSPLIT-01, NCCABLE-01

      There is no description for this product
    Learn More
  6. FGCLM-100G

    PrimeGuard Fall Monitor, Cordless

    Model # FGCLM-100G

    • Eliminate in-room noise – Quiet Resident Monitoring: Patented Technology CordLess® Monitor Alarm can be mounted away from the resident’s bed
    • Place Monitor above bed to reduce alarm noise near the residents head; helps keep monitor out of reach so the resident cannot reset alarm on their own
    • To reduce in room alarm noise, place Monitor in hallway, up to 50 feet away using the wall mounting hardware Caregivers notified by a bright blinking light and alarm when a resident is getting up
    • No cords between pads and CordLess® monitor: Cordless monitors and sensor pads help to reduce entanglement and tripping hazards Sensor pad is placed under the resident, when the resident gets up and the pressure is removed from the pad, a wireless signal is sent to the monitor alarm to alert caregiver
    • Patented safety features: The FGCLM-100G CordLess® Monitor continually indicates signal is being received from the sensor pad and the system is in good working order If signal is broken or out of range, monitor alarms and indicates signal is lost
    • Works with two components at one time: Use Quiet CordLess® monitor with bed sensor pad; wheelchair sensor pad; pressure sensing floor mat
    • QUIETER, fully Adjustable volume & Multiple alarm tones
    • Optional Setting: Caregiver with key can reset the monitor with Patented, Caregiver Key™ which Tamper proofs monitor
    • No Unsafe Off switch: Caregiver can’t forget to turn monitor back on
    • Auto-Reset when pressure is re-applied to pad Monitor Not in Use notification
    • Raised Visual Status light enabling caregiver to see alarm from a distance
    • Battery operated (3-AA not included), Low Battery notification
    • Nurse call capability – Plugs into existing nurse call system
    • Protective Boot helps prevent monitor damage
    • Works with CordLess® bed or chair sensor pads, CordLess® floor mats
    Learn More
  7. CLBED-SP10X30

    Bed and Sensor Pad, Cordless

    Model # CLBED-SP10X30, CLCH-SP10X15

    • Quieter, Wireless, CordLess® Alarm Pads: Remove room noise – No Cords, No Noise
    • When using a Wireless CordLess® Alarm Sensor Pad with a Wireless CordLess® Monitor you are able to remove the alarm noise from the room thereby creating a quieter room environment for the resident Sensor Alarm Pad is placed under resident while on the bed or while seated in a chair When resident gets up from pad, a wireless signal is sent to the monitor setting off the alarm to alert caregiver
    • A quiet solution for bed alarms for seniors No Cords! No Noise in their rooms!
    • Only for use with the FGCLM-100G Cordless Monitor Alarm
    • No cords! Reduces tripping hazards and eliminates broken or tangled cords
    • Portable! Can be placed outside residents room or go with resident in wheelchair
    Learn More
  8. TBED-SP10X30

    Timed Bed and Chair Sensor Pad, Cord

    Model # TBED-SP10X30, TCH-SP10X15

    • Corded Sensor Alarm Pads offer Caregivers an efficient means of receiving notification when a resident is getting out of a chair or bed When the Sensor Pad is connected to monitor alarm, the pad will trigger the alarm when weight is removed from the pressure pad itself These totally sealed and impervious to fluids weight-sensitive pressure pads are for use with Drive DeVilbiss Healthcare PrimeGuard alarm monitors
    • Patented Timed™ Bed Alarm Sensor Pads with Unique SafeTRelease™ Cords: No F-Tags! No Broken Cords! Bed Sensor Pad is placed under the resident while on the bed The monitor will alarm when resident gets up and pressure is released from the pad (Alarm Monitor Required) “Time-In-Use” feature only operational with a FGM-100CP Monitor
    • F-Tag compliant when used with timed pressure pads, automatically tracks the life of the sensor pad and alerts caregiver 10 days prior to pad expiration
    • Unique SafeTRelease™ cord guaranteed for life of pad (only on Bed Sensor Pad) SafeTRelease™ Cord separates instead of breaking or pulling cord away from pad No more replacing Bed Sensor Pads due to broken cords (Bed Sensor Pad cords can be replaced if broken)
    • Timed™ Chair Sensor Pads with Coiled Cords: Be F-Tag compliant! Pad is placed under the resident while seated in the chair The monitor will alarm when resident gets up and pressure is released from the pad (Monitor Required) “Time-In-Use” feature only operational with a FGM-100CP Monitor
    Learn More
  9. ASB-2109

    Alarm Seat Belt, with EZ or Kwik Release Buckle

    Model # ASB-2109, ASB-2109V

    • Wheelchair Seat Belts alert caregivers by triggering a monitor alarm when the ASB-2109 “One-Finger” EZ release buckle is unbuckled or ASB-2109V Kwick Release with Hook & Loop strap is opened The ASB-2109 “One- Finger” EZ release buckle preserves resident’s freedom of movement by not acting as a restraint The ASB-2109V Hook & Loop Kwik Release Seat Belt is great for residents with low dexterity Seat Belts are for use with the FGM- 100CP or FGCLM-100G Monitor Alarm
    • Metal-reinforced ends make installation easy and secure
    • Adjustable up to 54" and works with a standard fall monitor mounted to the chair
    • One Year Warranty
    • ASB-2109 One Finger EZ Release Buckle Seat Belt: Non-Restraint Buckle Seat Belt for Wheelchair; Large red button is easy-to-locate; Metal ends for secure installation; Easy-to-install and use
    • ASB-2109V Kwik Release Hook & Loop Strap Seat Belt: One-finger easy-release buckle; Metal ends for secure installation; Easy-to-install and use; Hook & Loop strap pulls apart for easy release
    • IMPORTANT: Seat Belts are not designed to restrain or hold individuals in position in their chairs
    Learn More

9 Item(s)

per page